TIIOCTI extra heavy duty moving bags in black with a reinforced stitched zip

Should You Lock the Spec First or the Factory First?

Built from an archived buying guide on custom moving bags in bulk, reworked around two sourcing paths and the checks that separate them.

by Nick Lee·8 min read·2025-11-06

Built from an archived buying guide on custom moving bags in bulk, reworked around two sourcing paths and the checks that separate them.

A test report came back clean on a 70L moving bag, and the buyer in Toronto still had a problem: the bag held winter coats but not the bedding she had promised her retail partner. The report measured what the lab was asked to measure. Nobody had written down what the bag needed to carry.

That gap sits at the centre of a choice every bulk buyer faces early. Do you lock the specification first and then look for a factory that can hit it, or do you find a factory first and let its material range and tooling shape the spec? Both paths exist, both ship containers, and they fail in different places.

Two Buyers, Two Folders, One Bag Order

Two people holding clipboards at a wooden table with a grey duffel bag in front of them.

One buyer arrives with a folder. Inside are a tech pack, a target capacity in litres, a print position marked in millimetres, and a short list of materials that will pass her market’s rules. She wants quotes against that folder.

The other buyer arrives with a factory shortlist. He has visited two plants, seen their PP and non woven lines running, and wants to know what those lines can make at his volume and price. The spec gets written after the visit, around what the machines already do well.

Neither buyer is careless. The difference is which document carries the risk. In the first case the buyer owns the spec and the factory is judged against it. In the second the factory’s capability owns the spec, and the buyer judges whether that capability fits the market.

Path A: Spec Sheet First, Factory Second

Hands measuring a woven fabric swatch against a metal ruler on a printed specification sheet.

Path A starts with a written requirement: shell material, dimensions, capacity, weight target, branding method, and the compliance documents the destination market expects. Only then does the buyer shortlist factories that can meet it.

This path protects the buyer from a slow drift. When three factories quote the same written spec, the comparison is honest, because everyone is pricing the same bag. It also makes the sample round cleaner, since the factory receives a document rather than a conversation.

The cost is time. Writing a spec before you know what the supply base can actually run at your volume can produce a beautiful sheet that two factories in ten can quote. If the spec calls for a shell or a print method that few lines handle, the shortlist shrinks and the price rises.

Path B: Factory First, Spec Sheet After

A worker in a high-visibility vest walking between rows of sewing machines in a bright factory.

Path B reverses the order. The buyer visits or vets factories, looks at their material range and their print stations, and asks what they make most often. The spec is then built around proven capability.

This path moves faster at the start. A factory that already runs zippered PP, PE and non woven moving bags for clothes, bedding and storage can tell a buyer within an hour what sizes and constructions are routine. The spec lands close to the machine, and sampling is quicker.

The risk is that the spec becomes a description of the factory rather than of the market. A buyer who lets the plant define the bag can end up with a product that is easy to make and slightly wrong for the shelf. That is how a capacity mismatch gets baked in before anyone notices.

Material: Who Decides the Shell and Who Signs Off

Under Path A, the buyer names the shell. The range is wide: PE, PP woven, non woven, polyester, nylon, canvas, jute and rPET. Each carries a different story on durability, sustainability and cost, and the buyer’s market usually narrows the list before the factory is contacted.

Under Path B, the factory presents what it runs well, and the buyer chooses from that menu. This is not a weaker position if the buyer asks the right questions. A stitched PP seam resists splashes but is not sealed, so the bag is not waterproof. A buyer who hears that in the meeting can decide whether the end user will ever carry the bag through rain.

The sign off point matters more than the order of decision. Someone has to confirm the material spec sheet and the test reports behind it, and someone has to accept that a supplier’s claim of eco friendly material means nothing without the paperwork. On Path A that check happens before quoting. On Path B it happens after the shortlist, which is later but still before the PO.

Size and Capacity: The Line That Changes the Bag

A grey fabric storage bag packed with folded blankets in a white hallway beside a cardboard box.

Size is where the two paths diverge most visibly. A spec first buyer writes dimensions and a target volume, then asks each factory to confirm net usable volume and whether it measures from inside or outside the bag. That single question prevents a quiet shortfall.

A factory first buyer often starts from a standard size the plant already cuts. That is efficient, but standard sizes are standard for the plant, not for the end use. Bags intended for moving appliances need far more room than bags for clothes or blankets, and a 70L standard can look generous on paper and feel tight in a hallway.

Whichever path you take, a physical prototype settles the argument. Dimensions, volume capacity and weight bearing ability all affect whether the bag works, and a drawing cannot tell you how a filled bag behaves when lifted by one handle.

Branding and Print: Where the Two Paths Really Diverge

A manual press beside a white board printed with a grey geometric pattern on a workbench.

A logo goes on by screen print, heat transfer, or a woven or embroidered label. Each method behaves differently on different shells, and this is the section where a factory first path usually wins on practicality.

A plant knows which print method suits its own material. Non woven has a soft touch and prints all over for promo ranges, which makes it a natural fit for a brand that wants colour across the face. A woven or embroidered label suits a quieter mark on a heavier shell. A buyer who writes the print method into the spec before talking to any plant may specify a combination that exists but runs slowly.

Path A still has an advantage here, because it forces the buyer to mark logo position and size on a tech pack before sampling. Logos placed too close to an edge or a seam distort during stitching, and a written position rule catches that early. The practical answer is to let the factory recommend the method and the buyer fix the position.

Quality and Compliance: What Each Path Can Prove

Compliance is the dimension where order of decision changes what you can prove, and when. A spec first buyer can write the required certificates into the brief and refuse quotes from factories that cannot produce them. The proof arrives with the quote.

A factory first buyer sees the plant before seeing the paperwork. That visit is useful, because it reveals whether the factory subcontracts work during peak season, a detail that rarely appears in a quotation. But a walk through the sewing floor does not prove that the glue meets the destination market’s chemical rules.

One European order of 5,000 units came back in full because the adhesive did not meet the required standard. The bag looked right and the shell was fine. The failure lived in a component nobody had put on the checklist, which is why certification review now runs before production on European orders rather than after.

Every order here passes four checks: incoming material, seams and zip, finished bag, final count. Those checkpoints belong in the PO on either path. So does a written definition of what counts as a defect, agreed before the first bag is cut.

Which Path Fits Your Order Size and Market

Path A suits buyers whose market rules are strict and whose product is unusual. If the destination requires specific environmental documentation, or the bag must hit an exact capacity for a retail planogram, write the spec first. The shortlist will be smaller, and that is the point.

Path A also suits buyers running several factories against each other for the same bag. A shared written spec is the only fair basis for that comparison.

Path B suits buyers with a clear volume, a familiar product and a market that rewards speed. If the bag is a standard zippered mover for clothes and bedding, a factory that runs that construction daily will often produce a better sample faster than a plant working from a cold spec.

Path B also suits first time importers who do not yet know what the supply base can do. A factory visit teaches more about material and print options in one afternoon than a month of reading.

A Decision Table You Can Take to the Meeting

Question Spec first Factory first
Who writes the shell requirement Buyer, before quoting Factory proposes, buyer approves
When capacity is confirmed On the drawing, then the prototype On the plant’s standard size, then the prototype
Who chooses the print method Buyer, from a tech pack Factory recommends, buyer fixes position
When compliance is proven With the quote After the visit, before the PO
Best fit Strict markets, unusual bags, multi factory comparison Standard movers, tight timelines, first time importers
Main risk A spec few factories can quote A spec shaped by the machine, not the market

The table is not a verdict. It is a way to see which risks you are better placed to carry. A buyer with a compliance team can absorb the spec first risk. A buyer with a strong factory relationship and a simple product can absorb the other.

What to Do Before the Next Meeting

Whichever folder you carry, three documents do most of the work. A material spec sheet with the test reports behind it, a prototype that confirms net usable volume measured the same way by both sides, and a PO that lists the four checkpoints and defines a defect.

If you have visited only one factory and cannot compare, write the visit into the PO as a set of commitments rather than impressions. Name the shell, the print method, the measuring convention for capacity, and the certificates required before shipment. A single visit plus a precise PO beats two visits and a vague order.

The spec and the factory are not rivals. One of them has to be fixed first, and the right one is whichever you can describe precisely enough that the other side can say no to it.

Discuss your bag project
Start a quote→
WhatsApp