Three numbers make a pallet instruction executable, and the rest is a drawing that the packing team can build the same way.
A pallet that arrives leaning, with the cartons on the bottom layer losing their corners, shows a compression failure before it shows a cube problem. Pallet patterns for cartoned bags are a compression decision before they are a cube decision.
A bag carton is light for its size and low in compression strength, so the pattern that saves the most space is often the one that crushes the bottom layer.
The question keeps coming up at the loading bay, when the pattern has already been built and the wrap is the only thing holding it square.
Why column stacking wins on a soft carton
Pallet patterns come in two schools. Interlocking patterns rotate the cartons between layers, which holds the unit together and concentrates load on the carton corners below. Column stacking aligns the cartons directly over each other, which preserves each carton’s compression strength and relies on wrap or strapping for stability. For soft cartons of bags, column stacking is the recommendation, because the interlock crossings are exactly where the boards crush.
| Pattern rule | Why it matters on a bag carton | Number to check |
|---|---|---|
| Column align, do not interlock | Soft cartons crush at every crossing | Zero carton overhang |
| Full pallet coverage | Unsupported ledges collapse in transit | 39.4 to 43.3 in footprint |
| Height band | Stability against container cube | 63.0 to 70.9 in load height |
| Wrap and strap | Unitises the column load | Stretch wrap and corner boards on top |
| Zero overhang | Hidden cube and damage loss on every face | 0 in on every face |
The pattern rules exist because pallet loads fail in predictable ways: compression at the corners and shift under vibration. Transit testing frameworks published by a packaging association start from that same observation, and a pre-shipment distribution test is what shows how a packed load behaves rather than how a drawing looks (ISTA).

Writing the pallet instruction
Three numbers make a pallet instruction executable, and the rest is a drawing that the packing team can build the same way twice.
- Cartons per layer and layers per pallet, stated as a pattern drawing with the rotation marked, so the footprint is built the same way on every pallet.
- Total pallets per container, checked against the container’s internal dimensions, so the load plan proves it fits before the truck arrives.
- A crush statement, giving the maximum stack height for the carton grade, which protects the bottom layer from the weight of the pattern itself.
- A count and a photograph of the finished pallet, taken before the container seals.
- The packed quantity confirmed by hand, so the cartons on the pallet match the count on the file.
The instruction is only as good as the carton it describes. A pattern that preserves compression strength can only preserve the strength the board actually has, which is why the carton grade and the pattern are written together.

Where the pallet math goes wrong
Interlocking a soft carton is the first mistake, because the pattern looks stable in a drawing and crushes the bottom layer on the road.
- Pallet overhang left to the packer. State zero overhang on the instruction and check it at the loading inspection, because overhang is the largest hidden cube and damage loss in soft freight.
- Stack height chosen for cube alone. A band of 63.0 to 70.9 in including the pallet is the common stability compromise, and higher stacks need corner boards and wrap discipline.
- Humidity left out of the calculation. Carton strength falls as the air around it gets damper, so a long route in a damp season is a different stack question from a dry one.
- Pallet or loose load chosen by habit rather than by destination. Palletise where forklifts unload and the load has to move fast; loose load a full container heading to one warehouse.
A soft carton loses compression strength as the air around it gets damper, and the board industry treats that as a primary driver rather than a footnote (Fibre Box Association).
The effect of Relative Humidity is one of the most significant considerations for corrugated packaging performance
The fourth mistake is arithmetic rather than craft, and it is the one that scales: a pattern that is one carton short per layer is a pallet that arrives short on every pallet in the container.

Questions buyers ask about pallet patterns
Should bag cartons be palletised or loose loaded?
Palletise for distribution centre and multi-stop deliveries where forklifts unload, such as a retail flow, and loose load for a full container heading to a single warehouse with time to hand unload.
Why does column stacking beat interlocking for soft cartons?
Interlock crossings concentrate load on the carton corners below and crush soft boards, while column stacking preserves each carton’s compression strength and lets the wrap provide stability.
What load height should a bag pallet target?
Target the tallest stack that still stands square after the wrap, and treat anything above the usual band as a stack that needs corner boards and extra wrap turns.
Measure the first pallet with a tape against its base, and treat any carton that sits proud of the edge as a rebuild rather than a wrap problem.
What we count before a pallet leaves
A pallet pattern is only repeatable if the count behind it is repeatable too. Our packing spec is agreed before production, whether polybag, retail or per store packing, and the finished dimensions, handles, logo and packed quantity are checked by hand, so the carton that goes on the pallet is the carton the pattern was written for.
The material behind the carton matters as well. Incoming fabric, webbing, zips and thread are checked against the approved spec, and pull, seam strength and bar tack are tested on every batch, because a bag that fails inside the carton is a pallet that arrives short whatever the pattern.
For example, when a load is built, the first thing we check is the count and the carton photograph against the packing instruction, because a count difference is usually a packing difference rather than a pattern difference. We check incoming material, seams and zips, finished dimensions and the final carton count , and the cartons are photographed before loading , which is the record the next pallet is checked against.

Five moves before the loading bay
Five moves keep a pallet pattern honest, and all five happen before the container is loaded.
- Write the pattern as a drawing with cartons per layer, layers per pallet and the rotation marked.
- State zero overhang and the load height band, then measure the first pallet against both.
- Write the crush height for the carton grade, and check the bottom layer against it.
- Photograph the finished pallet and count the cartons before the doors close.
- Compare the load plan with the container’s internal dimensions, so the pallets fit before they are built.
A buyer who runs those five moves ends up with a pattern that repeats, which is the only property that makes a pallet comparable from one container to the next.
Related ground sits beside this page. The wood packaging rule under the pallet is in Pallet Compliance: The Mark a Bag, the packing spec that keeps a tote clean is in Retail Ready Tote Bag Packaging, Checked, and what to do with a carton that fails the check is in Rejected Cartons: The Decision After a. All three start from the same count this page protects.

Related reading from the same line: Pallet Compliance: The Mark a Bag Rejected Cartons: The Decision After a.

