Bag Guides

149 guides in this line.

DDP vs FOB: Which Term Puts Which Step on Your Desk

DDP vs FOB: Which Term Puts Which Step on Your Desk

DDP vs FOB decides who books the freight, who files the import entry and where risk passes, plus the packed depth your carton carries either way.

Read article →
Self-Locking Zipper Bags: The Lock Fails Before the Teeth Do

Self-Locking Zipper Bags: The Lock Fails Before the Teeth Do

Self-locking zipper bags fail at the slider, not the teeth: the three lock types, the tests that catch a bad cam, and the lines to put on a zip spec.

Read article →
Custom Logistics Bags Case Study: A 500 Store Rollout

Custom Logistics Bags Case Study: A 500 Store Rollout

Custom logistics bags case study: the fabric grade, the approved sample, the print route and the store label that hold a 500 store rollout together.

Read article →
Custom Heavy Duty Bags: How to Avoid QC Disasters

Custom Heavy Duty Bags: How to Avoid QC Disasters

Custom heavy duty bags fail after the sample, not before it: the safe print area, the ink adhesion check and the colour sheet that hold a batch.

Read article →
Heavy Duty Bag Certifications: The Paper and the Bag It Describes

Heavy Duty Bag Certifications: The Paper and the Bag It Describes

Heavy duty bag certifications read against the entity that holds them: what a quality system covers, what a barcode covers, and the four step check.

Read article →
Bag Factory Vetting: A Batch That Failed Its Own Sample

Bag Factory Vetting: A Batch That Failed Its Own Sample

Bag factory vetting through one failed order: what the retained sample showed, the two tests a line must run itself, and the checks that stop a repeat

Read article →
Zipper Tensile Force: What a 50 lb Pull Misses

Zipper Tensile Force: What a 50 lb Pull Misses

Zipper tensile force is only a number until the failure mode is named. See the 4 readings a retail tote order should ask for and what each proves.

Read article →
Factory Audit Report: Reading the Sections Buyers Skip

Factory Audit Report: Reading the Sections Buyers Skip

A factory audit report read as a risk document: the three sections buyers skim, the seven pillars scored 1 to 3, and the lab check behind the numbers.

Read article →
How to Reduce Defect Rates in Custom Retail Packaging

How to Reduce Defect Rates in Custom Retail Packaging

Reduce defect rates in custom retail packaging: the 3 gates before the run, the inline checks for print and handle faults, and what to lock on the sam

Read article →
Zipper Quality Testing: Three Measures and One Bench Check

Zipper Quality Testing: Three Measures and One Bench Check

Zipper quality testing on a moving bag: the 3 measures a batch has to pass, the assembly faults a buyer can see, and the first lot checks that settle

Read article →
Bag Factory Red Flags a Buyer Sees in 40 Minutes

Bag Factory Red Flags a Buyer Sees in 40 Minutes

Bag factory red flags that show on the floor rather than in the file: the reject bin, the stitch pull, the thread tails, the batch tags and the job ca

Read article →
What Should a Factory Audit Checklist Cover Before Cutting Starts?

What Should a Factory Audit Checklist Cover Before Cutting Starts?

A factory audit checklist in the order a buyer walks it: the spec brief, the seven floor checks, the scoring, and the red flags that stop a bad lot.

Read article →